How to Fill a Gap Between Drywall and Ceiling?

5 On-Demand Handyman Service Providers in the USA

Placing drywall often increases the beauty of your room and mostly makes it resistant to fire. But the installation is pretty complex. Even then, experts in this sector may sometimes make mistakes that lead to unwanted situations. Incredibly filling the gap between drywall and tavan extensibil is pretty tricky.

However, the process is actually not that complex if you hire a professional like us. With so much experience and skill this we can solve this problem in no time.

Let’s see how to solve this problem in some easy steps.

Why The Gap Between Dry Wall And Ceiling Does Appears?

There are several reasons for the incident to happen.

  • The wooden frame of the roof soaks up humidity and swells. Then again, it cools down and shrinks. When shrinking, the frame pulls the ceiling with it. So, it creates a gap between the ceiling and the drywall.
  • Sometimes due to uneven finishes during installation, this crack may appear. Sometimes when building the house, the joint is not put together correctly or firmly. Over time the joint becomes weak and cracks open.
  • A natural disaster also can make this happen, such as earthquakes, floods, etc.

Despite the reason, it is essential to fill the gap as soon as possible.

How to Fill a Gap between Drywall and Ceiling: Step By Step

Materials needed:

  • Fiberglass drywall mesh tape
  • Putty knife
  • Paper tape
  • Drywall joint compound or mud
  • Sanding block
  • Utility knife or Taping knife

So now you start your installation process.

Step 1: Secure the room from paints

Take out all the furniture. Put drop cloth or plastic all over the floor. Otherwise, during patching or painting, the room may get filthy.

Step 2: Use mesh drywall tape

Use a fiberglass mesh drywall tape to cover the gap. Make sure the edge of the drywall tape touches the ceiling. Remember, the tape has to cover the whole crack. Now cut the extra strap with a utility cutter or scissor.

Step 3: Put mud on the joint

Put the drywall joint compound or mud on the mesh tape. You can use a putty knife. Press the mud into the tape so that the entire small mesh holes are fully covered with the mud.

Step 4: Use paper tape (optional)

Now put a paper tape and cover the mud. Press the tape against the mud firmly so that it sticks properly. Next, create a crease on the corner using a knife.

Step 5: Cover the paper tape with more mud

Put some more drywall joint compound on the paper tape. This time, the coating should be lighter and thinner. Put only one coat of mud and spread it as evenly as possible. Blend the mud by extending it over the wall and ceiling.

Step 6: Let the mud dry

Now, wait for some time to let the mud dry. Then repeat the whole process again. Put some mud to cover the tape, place a paper tape, and coat it with a thinner layer of mud. Again, let it dry.

Step 7: Sand the surface

Once the mud layer is dried thoroughly, sand the surface to make it smooth. As a result, the joint and the wall will blend well. Remember to sand slowly and carefully. You don’t want to sand the paper tape.

Step 8: Clean the surface

After sanding and making the surface smooth, clean it. Use a cloth to wipe the surface.

Step 9: paint matching the wall

Finally, pain the joint area according to the color of the wall. Let the paint dry before putting another coat if you want.

Tips To Get A Perfect Finish:

  • Use gloves and glasses if needed.
  • Wear old clothes so that you can dispose of them after work.
  • Use a spoon or gloves while preparing the powdered joint compound. It is better to use stir whip tools to blend the mixture smoothly.
  • Choose the suitable mud according to your project. If it is a DIY project, use muds that settles slowly. Otherwise, you will not be able to use them as they tend to dry faster.
  • Do not use excess paper tape overlapping each other. Otherwise, it will create a budge and will not match with the wall.

Bottom Line

Hopefully, now you know How To Fill A Gap Between Drywall And Ceiling. Although they seem really easy to follow steps, they can be tiresome and need a lot of patience.

So, we strongly recommend handing over the job to the professionals. That is because a bit of mishap can not only create more problems, but also you can hurt yourself in the process. So, let the experts do what they do better.

Leave a Reply

Your email address will not be published.

Back To Top