Resolution for the Canon Printer Error Code 1688

The Solution to the Canon Printer Error Code 1688

This article will walk you through what to do in the event that the error code 1688 check ink displays on your computer screen whenever you attempt to print.

The fact that you have received this error notice so soon after inserting a freshly remanufactured cartridge or refilling your cartridge may come as a surprise to you. The reason for this is that the Canon printers in question are unable to inspect or determine whether or not the cartridge contains new ink.1688 check ink

Instead, when a cartridge is first loaded into a printer, it immediately begins to keep a record of the number of pages that have been produced as well as the average page coverage. Your printer makes use of this information to make an educated guess as to the amount of ink remaining in the cartridge and displays the “1688 check ink” message whenever it thinks the cartridge is running low or empty.

Because of the way in which printers determine when an ink cartridge is empty, even an original Canon ink cartridge will always have some ink remaining even after the printer has informed you that the cartridge is empty. First things first, let’s have a look at how to get rid of the Canon 1688 check ink error messages.

Is There a Way to Remove This Error Message From My System?

Yes, and the process itself is straightforward. When this Canon printer line detects that the cartridge may be empty, it allows you to continue printing with the touch of a single button and will generally present you with a pretty large message to inform you that the cartridge may be empty.

You need to press and hold the STOP/RESET/RESUME button on your printer for a full five seconds before you can let go of it. The icon that corresponds to the button will never change, despite the fact that its name can be renamed at some point.

It could be grey, pink, or even scarlet depending on the sort of printer that you have. When you continue to hold down this button for five seconds, you let your printer know that you are aware of the low/empty cartridge estimation but that you still want to continue printing nonetheless. Even though the ink level is still low at this point, you can continue printing with this cartridge until the ink runs out, at which point the print quality will begin to deteriorate.

Is It Unsafe to Carry Out Such an Action?

There are none to be discovered everywhere. If a physically empty cartridge is used too often, the printhead on the cartridge may eventually burn out. Monitor the print quality that the cartridge offers carefully. You may protect yourself from any potential damage by always recycling or changing the cartridge when it is empty.

If you don’t realize that the ink has run out and you wind up burning out your printhead, you can easily replace the cartridge with a new one and your printer won’t be damaged. If you don’t detect that the ink has run out, however, you could end up burning out your printhead.

What is the most effective technique to resolve error 1688 on a Canon printer?

Answer: Put the ink tank back in position and then shut the operating panel. It is likely that the printer will be damaged if you continue to print under these conditions. If you wish to keep printing despite the current situation, you will need to disable the function that determines how much ink is left in the cartridge. You need to press and hold the Stop button for at least 5 seconds before you may let go of it.

How can I remove the support code 1688 as quickly and easily as possible?

Answer If you want to stop, reset, or resume your printer, press and hold the button labeled “STOP/RESET/RESUME” for five seconds before letting go of the button. The icon that corresponds to the button will never change, despite the fact that its name can be renamed at some point.

 

Leave a Reply

Your email address will not be published.

Back To Top